Skip to content

VPN not connecting on Android? Fixes to try

VPN not connecting on Android? Work through these fixes, from the internet connection to Always-on VPN and battery saver, plus Jango VPN error messages.

Published 7 min read

The short answer

When a VPN does not connect on Android, the cause is usually one of these: the internet connection itself is not working, another VPN app is active, the Always-on VPN setting belongs to another app, a battery or data saving mode is in the way, or the network blocks VPN traffic. Work through the checks below in order. In Jango VPN, also check that you have VPN time left.

The first three sections work for any VPN app. The last two are about Jango VPN. New to VPN apps? Start with How to set up and use a VPN on Android.

Start with the quick checks

  1. Test the internet without the VPN. Disconnect the VPN and open a website. If nothing loads, the VPN is not the problem. Google’s steps for fixing an internet connection on Android are: restart the phone, switch between Wi-Fi and mobile data, and turn airplane mode on for 10 seconds, then off.
  2. Sign in to the Wi-Fi. Many public networks show a sign-in page first. Android shows a notification such as “Sign in to Wi-Fi network”. Finish that step, then connect the VPN.
  3. Update. Install the newest version of the VPN app, and any Android update that is waiting.
  4. Try another server. One location can be down or full while others work.
  5. Try another network. Switch from Wi-Fi to mobile data, or the other way around.

Android settings that stop a VPN

Did you accept the connection request?

Before a VPN app can become active for the first time, Android shows a connection request and asks you to confirm that you trust the app. If you close it, the VPN cannot start. Tap connect again and accept it.

Is another VPN app active?

Android runs only one VPN connection at a time. When a second VPN app starts, the first one stops. Some apps that are not called VPN use the same system, for example firewall, antivirus and parental control apps. Disconnect the other app, then connect again. A key icon in the status bar means that a VPN is active.

Always-on VPN and “Block connections without VPN”

Since Android 7.0, Always-on VPN lets Android start one VPN app when the phone starts and keep it running. Its second switch, “Block connections without VPN”, blocks all traffic that does not go through that VPN. Two things follow:

  • While one app is set as Always-on VPN, Android does not let a different VPN app take over.
  • With the block switch on, the phone has no internet whenever that VPN is not connected.

To check, open Settings, then “Network & internet”, then “VPN”, and tap the settings icon next to each VPN app (Google’s steps). Menu names differ between phone makers. Search the settings for “VPN” if you cannot find the screen.

Battery saver, data saver and background limits

Battery Saver limits or turns off background activity, and on standard Android background apps lose network access while it is on. Phone makers decide the exact limits. Data Saver lets most apps get background data only over Wi-Fi. If your VPN drops when the screen is off or when you switch apps, turn these modes off as a test.

Is the date and time correct?

Some VPN protocols depend on the clock of the phone. With WireGuard, for example, the handshake fails when the system time jumps backwards. Turn on “Automatic date and time”.

When the network blocks VPN traffic

A network can block VPN traffic. A sign of this: the VPN connects on mobile data but not on one Wi-Fi network, or the other way around. The protocol matters here. WireGuard sends its data over UDP only and does not try to disguise itself, so a network that blocks UDP or recognizes VPN traffic can stop it. An app cannot repair that. Use another network, or ask the person who manages the network.

If you use Jango VPN

Jango VPN is an Android app that uses the WireGuard protocol and needs no account. Its free plan shows ads and has a time limit, so look at your VPN time first.

Your free time is used up

The free plan gives you free VPN time every day. When the time reaches zero, the VPN disconnects, your phone goes back to the normal network, and the app shows “Your VPN time has ended”. Tap “Watch ad” to add time, wait for the free time of the next day, or choose “Go Premium”. Premium has no ads and no time limits.

You reached the daily ad limit

There is a daily limit on the time you can earn from ads. At the limit the app says “You’ve reached today’s ad limit. Come back tomorrow for more free time, or go Premium.” A different message, “No ad is available right now. Please try again shortly.”, means that no ad could be loaded at that moment.

Always-on VPN is not supported

Free time can run out, so Jango VPN cannot promise to stay connected at all times. The app tells Android that it does not support Always-on VPN, and on Android 8.1 and newer Android then turns those options off for it. If the switches still appear on an older phone, leave them off. If the app stays on “Not connected” after you tap the power button, check whether another VPN app has Always-on turned on, and turn it off there. The app has its own “Auto-connect” setting, which connects when you open the app.

One app does not use the VPN

Open Settings, then “Split tunneling”. Apps selected there bypass the VPN, and a change applies from the next connection. The Jango VPN app itself always stays outside the tunnel. More in Split tunneling on Android.

What the Jango VPN error messages mean

Message in the appWhat it means and what to do
“Couldn’t reach the VPN service. Check your internet connection and try again.”The app could not reach the Jango VPN service. Check that the internet works without the VPN.
“Too many connection attempts. Wait a minute and try again.”The service limits how often one network can ask for a connection. Wait a minute, then tap once.
“The VPN service is full or busy right now. Please try again in a few minutes.”The service cannot take another device at the moment. Try again a few minutes later.
“This country isn’t available right now. Please choose another one.”The country you picked is not offered at the moment. Choose another one.
“The VPN server didn’t respond. Try again or choose another country.”The server did not answer. It may be down, or the network may block VPN traffic. Try another country, then another network.
“Android turned the VPN off. Another VPN app may be in use, or the VPN permission was removed.”Android stopped the VPN. Disconnect other VPN apps, check Always-on VPN in the Android settings, then connect again and accept the request.
“The VPN service isn’t available right now. Please try again later.”The problem is on the side of the service. Try again later.
“Couldn’t start the VPN on this device. Please try again.”Android could not create the VPN connection. Restart the phone and try again.

Still stuck? Open Settings, then “Connection logs”, to see the latest connection events. The logs stay on your device unless you share them. With “Report a problem”, under “Contact and support”, you can write to support. The Help page has more answers, and the Features page describes each setting.

Questions and answers

Can I run two VPN apps at the same time on Android?

No. Android runs one VPN connection at a time for each user or work profile. When you start a second VPN app, Android stops the first one.

Why does my VPN disconnect when the screen is off?

Battery Saver and the background limits of some phones can stop apps or cut their network access when you are not using them. Turn Battery Saver off as a test. In Jango VPN, also check whether your free time ran out.

Does Jango VPN support Always-on VPN?

No. Free VPN time can run out, so the app cannot stay connected at all times. Its Auto-connect setting connects when you open the app.

Keep reading

Get Jango VPN on your Android phone

Free to download. No sign-up. One tap to connect.